Completely Compatible with YONGNUO YN622C and RF-603 Wireless System: YN685 supports respectively receiving wireless triggering signal from YN622C, YN622C-TX, YN560IV, YN560-TX, RF605, RF603II and RF603.
Remote Control Off-camera Parameters of Each Group: The flash mode, flash intensity, focal length and sync mode (YN622C wireless system only) of the speed-lite in each group can be controlled remotely through YN622C transceiver and YN560IV/YN560-TX.
[email protected],200mm: YN685 is a 2.4G wireless speed-lite of high guide number, which supports TTL, M and Multi mode.
High Speed Sync (HSS): When HSS function is activated, this speed-lite YN685 can be used with every shutter speed and the maximum sync speed is up to 1/8000s. Note: The camera and transceiver should support HSS function.
Ultra fast Charging Recycle System, supporting External Power Supply: The recycling time is 3 seconds when the power output is set to maximum. The recycling time is about 4~5 seconds even this speed-lite is used without using fresh batteries. In addition, you can use the external power supply to meet your higher charging recycle need.
Supports Auto/Manual Zooming: YN685 supports auto and manual zooming, and the flash coverage can be changed between 20~200mm.
Supports Sound Prompt Function, Custom Settings (Fn.) and Auto Save Settings.
Equipped with Big Size LCD Display Screen, standard PC Synchronous Interface.

yongnuo YN685C
yongnuo YN685C

Wireless Slave Mode:

YN622C Wireless System ( there are total 7 channels and 3 groups )
Remote Control mode: the remote control mode of YN685 is compatible with the master unit is YN622C-TX, the master unit is YN-622C, and the YN-622C has been enabled the remote control mode.
Mix mode: the remote control mode of YN685 is compatible with the master unit is YN-622C, and the YN-622C has been enabled the mix mode
RF-603 Wireless System ( there are total 16 channels and 6 groups )
t can receive the wireless trigger signal from YN-560 IV, YN560-TX, RF-605, RF-603 II
Multi-flash Wireless Flash Configuration
Wireless flash of two slave units made up by YN685
Wireless flash of multiple slave units made up by YN685

Compatible with :

Hot shoe TTL mode:For Canon 1Dx, 1Ds series, 1D series, 5DIII, 5DII, 5D, 7D, 7DII 70D, 60D, 50D, 40D, 30D, 20D, 700D, 750D 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D,100D, 1100D, 1000D, 1200D
Wirelss TTL Slave mode:For Canon 5DIII 7D 70D 60D 700D 650D 600D, Yongnuo ST-E2, for Canon 580EX II
Wireless Manual ( RF-603 mode ) System
Yongnuo YN-560IV, YN560-TX, RF-605, RF-603 II
ALL DSLR Standard Hot shoe Camera

Package Included:
1 x Yongnuo YN685 Flash speedlite
1 x Protecting bag
1 x Mini Stand
1 x Manual in English and Chinese
1 x Original Retail Box



There are no reviews yet.

Be the first to review “YONGNUO YN685C GN60 2.4G ETTL HSS Wireless Flash Speedlite with Slave for Canon”